Adjustments: Gear and Braking systems will be calibrated. Air Pressure, Preload, Compression, and Rebound settings can be tuned at request of customer. Wheel Bearing Preload and Bearing Tensions will be adjusted where possible.
Cleaning: Chain, Cassette, Derailleur and Crankset will be removed from the bicycle and cleaned. Frame, Wheels, Fork Seals and Shock Seals will be cleaned.
Rebuild: Hub Bearings, Headset Bearings, and Bottom Bracket Bearings will be stripped, cleaned and re-greased. Swingarm Bearing Condition will be checked, these are cartridge bearings and cannot be reconditioned once worn.
Lubricate: Chain will be lubricated, seatpost grease will be replaced, hydraulic oil/fluid will be replaced.
*Internal Shock or Fork repair/service is over and above the scope of this service. **Hydraulic brake bleeding is not included in this service.